The following is an overview of the user manual for the Z-Wave product Nano Dimmer (ZW111-D)from Aeotec. To view other Z-Wave products and manuals from Aeotec follow that link.
Aeotec Nano Dimmer is a Z-Wave Smart Dimmer specifically used to enable Z-Wave command and control (on/off/dim) of any wall switches. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status.
It can connect to 2 external manual switches to control the load ON/OFF independently. Its surface has a pin socket, which can be used for connecting to the touch panel, so you can also use the touch panel to control the Nano Dimmer.
The In-Wall Dimmer is also a security Z-Wave plus device and supports Over The Air (OTA) feature for the products firmware upgrade.
As a Z-Wave Plus certified product, Nano Dimmer supports Z-Wave S2 security. The following security modes are directly supported:
Aeotec describes Nano Dimmer as having the following features:
Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing.
Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing.
Support ""Over the Air Firmware Updating"" and “Z-Wave Security”.
Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable.
Please note that this is a user manual Nano Dimmer from Aeotec is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Nano Dimmer and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.